Nurse Call System - OPD
Models of Nurse Call System:![]() ![]() ![]() ![]() ![]() Description of NCS OPD
The system is designed to help consulting Doctors working from their OPD rooms to call Nurse for any help. The
system also allows for Doctors’ presence indication both on a common panel at Nurse station and on the Door
indicator individually.
The system consists of Dual Function Nurse Station Controller (NSC_DF), two types of displays (static LED windows and dynamic LCD display), CNP Module (DFRU), Toilet Calling Unit (CCTU) and a Door Indicator (DI) ![]() For enhanced features like call forwarding, call escalation and centralized display following modules can be added to the system
Dual Door Indicator also serves two purposes namely: Doctor’s presence is indicated by lighting up the Door indicator in Green color while the absence is indicated in Red color. If a nurse is requested for, the Door indicator is made to flash in Amber color. If LCD TV and management information is required then the PC has to be added to the system.The LCD TV can be made use of both for Nurse Call and Doctor’s Presence indication. Optional Supervisory Display can work in the absence of PC for indicating call escalation. Product Features:
NCS Specifications: |
Modules:NS-Display![]() Power Button: Pressing this for long time(approximately 3 sec) turns the device ON or OFF. MUTE Button: It is for acknowledging a call from patient. It will make the flashing window steady and also silence the voice module until a call is cleared. Test Button: On pressing the button it will flash all the windows and will announce ” Attention, Patient calling ” to make sure that all the components are working fine. Doctor Presence Indicating Panel (DPIP)![]() Technical specifications: Dimension : Weight : 3 Kg Material : Plastic Enclosure CNP Module (DFRU)CNP Module (DFRU) is designed around a RISC based microcontroller to read the keys on it, to interface with all room modules viz: TCU, DI and to report their status to the Nurse Station Controller.Features: ![]()
Specifications: Gets powered by Nurse Station Controller, consumes less than 5 watts. Uses 4 pairs of wires to get inter-connected with Nurse Station controller. Technical specifications: Dimension : 118mm (L) X 90mm (W) X 53mm (H) Weight : 200 g Material : Plastic Enclosure Toilet Calling Unit (CCTU)![]()
Technical specifications: Dimension :118mm (L) X 90mm (W) X 53mm (H) Weight : 115 g Material : Plastic Enclosure Dual Function Nurse Station Controller (NSC_DF)![]() Dual Function Supervisory Controller (SUC_DF)![]() Supervisory LED Display![]() Door IndicatorThese semi circular shaped indicators can be mounted on the wall near the patient's door so that , nurse walking through the corridor can see it from a distance.These are made of super bright LEDs to indicate patient's call pending which can be seen from the corridor itself.![]() Specifications: Dimension :100mm (diameter) X 60mm (H) Weight :73 g Material :Plastic Enclosure Models of Nurse Call System: |
|
Nurse Station Display:Indicators : flashing 5 mm LED to indicate NCS is active. Power : 230 V AC +/-10%,50Hz, 15 watts Display Windows
Front Panel Keys
Dimension/Weight:
Cable Specifications:
Environmental Specifications for all Modules:
|
||